Elastic & Flexible OEM Acetic Silicone Glass Sealant Adhesive for General Purpose Elastic & Flexible OEM acetic silicone Glass Sealant Adhesive for general purpose.
1. Product introduction
Elastic & Flexible OEM Acetic Silicone Glass Sealant Adhesive for General Purpose Elastic & Flexible OEM acetic silicone Glass Sealant Adhesive for general purpose. It has excellent elasticity, sealing performance and weather resistance, and can provide a stable sealing effect in a variety of harsh environments. This product is widely used in glass, metal, plastic and other materials bonding and sealing. The following describes the product features, advantages, features, performance specifications, usage methods, and application areas of Elastic & Flexible OEM Acetic Silicone Glass Sealant Adhesive for General Purpose.
2. Product features
Excellent elasticity: Silicone adhesive has excellent elasticity and can adapt to the small displacement of the bonding surface to ensure long-term stability. The product has undergone rigorous elastic testing, showing excellent elastic properties to ensure stability under various conditions of use.
Sealing performance: With excellent sealing performance, it can effectively prevent the intrusion of water, dust and noise. The product has undergone strict sealing performance testing, showing excellent sealing performance to ensure stability under various conditions of use.
Weather resistance: adapt to various climatic conditions, anti-ultraviolet, anti-aging, prolong service life. After a long time of outdoor exposure testing, the product shows excellent weather resistance, ensuring stability in harsh climates.
Environmental safety: non-toxic, odorless, no volatile organic compounds (VOC), friendly to the human body and the environment. The product has passed the environmental protection certification, meets the national environmental protection requirements, and will not cause harm to the environment and human body during use.
Chemical resistance: Good resistance to oil, water, acid and alkali and other media. The product has been tested in a variety of chemical media, showing excellent chemical resistance to ensure stability in complex environments.
Versatility: Suitable for bonding and sealing of glass, metal, plastic and other materials. The products have a wide range of applicability and can meet the bonding and sealing needs of different materials.
3. Product advantages
Improve safety: effectively improve the sealing performance of glass, metal, plastic and other materials to reduce the risk of accidents. The elastic properties of the product can adapt to the small displacement of the bonding surface to ensure long-term stability.
Cost savings: Weather resistance can reduce the frequency of replacement and reduce the cost of use. The long-term stability of the product can reduce maintenance costs and improve economic efficiency.
Easy to operate: single component design, no need for on-site deployment, saving construction time. The product adopts pre-mixed design, no need to deploy on-site, directly daub, save construction time, improve work efficiency.
Environmental safety: does not contain harmful substances, meets environmental requirements, and is friendly to the human body and the environment. The product has passed environmental protection certification, non-toxic, tasteless, no VOC, and will not cause harm to the environment and human body during use.
Enhance competitiveness: The use of high-quality adhesives can enhance the overall competitiveness of the product and help enterprises stand out in the fierce market competition. The excellent performance of the product can meet the strict requirements of customers on sealing, elasticity, etc., and enhance the competitiveness of the product.
Customized services: Provide a variety of colors, specifications and performance options to meet the needs of different customers, to provide personalized solutions.
4. Product features
Single component: no mixing, direct use, simplify the construction process.
Fast curing: Fast curing at room temperature to improve work efficiency.
Good fillability: It can fill the small gap of the bonding surface and improve the bonding effect.
Good elasticity: It has certain elasticity and can adapt to the small displacement of the bonding surface.
5. Performance indicators
Color: Yellow or black
Viscosity: 3000-5000cps (25°C)
Curing time: curing within 24 hours at room temperature, low temperature may extend the curing time
Hardness: Shore A 20-30
Tensile strength: ≥5MPa
Peel strength: ≥2N/cm
Operating temperature: -40°C to 150°C
6. FAQ
What are the main ingredients of general purpose silicone acetate glass sealant?
The main ingredients include acetate silicone polymer, filler, plasticizer and curing agent. Acetate silicone polymers are key components that provide the essential properties of sealants such as adhesion and sealing properties. Fillers are used to adjust the physical properties of sealants, such as increasing hardness and reducing costs. The plasticizer can improve the flexibility of the sealant, and the curing agent can promote the curing reaction of the sealant under certain conditions.
What are the unique performance characteristics of this sealant?
It has good bonding properties and can be firmly bonded to a variety of materials such as glass and ceramics. At the same time, it has a good sealing effect and can effectively prevent the penetration of air and water. It also has a certain weather resistance, in different climatic conditions, such as high temperature, low temperature, wet environment, can still maintain stable sealing and bonding performance. In addition, its curing process is relatively fast, helping to improve construction efficiency.
What is its temperature range?
The temperature range of general purpose silicone acetate glass sealant is between -30 ° C and 100 ° C. In this temperature range, it can maintain good sealing and bonding performance, and will not soften, crack or lose bonding force due to temperature changes. However, when the temperature is close to the limit value, its performance may have a certain degree of attenuation.
What factors affect the curing speed of this sealant?
It is mainly affected by ambient temperature, humidity and the thickness of sealant. The higher the temperature, the faster the curing speed, such as in a high temperature environment above 30 ° C, the sealant may be cured within 1-2 hours; At lower temperatures (such as below 10 ° C), the curing speed will be significantly slowed down, and it may take hours or even days to fully cure. Humidity also has a certain impact on the curing speed, and the relative humidity is more suitable at 40%-60%. The greater the thickness of the sealant, the longer the curing time.
Is it waterproof?
Yes, it has good water resistance. Once cured, it forms a continuous sealing layer that effectively prevents water penetration. In the bathroom, kitchen and other wet environment of glass sealing, tile and glass joint sealing, etc., can play a good waterproof sealing role.
How strong is the smell of sealant? Is it harmful to human health?
In the uncured, there will be a certain acetic acid smell, relatively obvious, but this smell will gradually dissipate with the curing process. In normal use and a well-ventilated environment, the cured sealant has minimal harm to the human body. However, if you are exposed to uncured sealant for a long time in a closed space with poor ventilation, it may irritate the respiratory tract, so you should ensure good ventilation during construction.
Which materials are suitable for sealing?
It is mainly used for sealing of glass, ceramics, some metals (such as aluminum, stainless steel) and other materials. For example, it can be used in the sealing of glass curtain walls in buildings, the sealing of glass Windows and window frames in families, the sealing of ceramic washbasins and countertops, and the sealing of stainless steel kitchenware and glass panels.
How to properly use general purpose silicone acetate glass sealant for sealing?
First of all, to clean the surface of the sealed material, remove dust, oil, water and other impurities. Then the sealant into the glue gun, according to the required shape and length evenly extruded in the sealing part. For larger gaps, it can be extruded multiple times to ensure that the gaps are filled. After extrusion, you can use a tool (such as a scraper or finger dipped in a small amount of alcohol) to smooth the surface of the sealant to achieve a better appearance.
