Angu foam phenolic glue is a kind of glue with corrosion resistance, low odor, high strength and excellent brushing performance; Sprayable construction, fast surface drying speed, long bonding time, non powderng, easy operation.
Product Introduction
Angu foam phenolic glue is a kind of glue with corrosion resistance, low odor, high strength and excellent brushing performance; Sprayable construction, fast surface drying speed, long bonding time, non powderng, easy operation, and this product has passed the national GB33372-2020 standard and GB18583-2008 standard. (The product is a yellow liquid)
1. Clean the surface of the material to ensure that it is dust-free and flat.
2. Shake the adhesive thoroughly before use
3. Apply evenly on the surface of the material (double-sided brushing)
4, After evenly brushing, wait for more than 60 seconds (special environments can vary according to actual conditions, and touching the adhesive layer by hand without lifting the adhesive film is considered as surface drying)
5. After bonding, apply force to the bonding area to fully composite the adhesive layer on the bonding surface
Rubber sponge, PEF, phenolic board, extnuded board, pearl foam board, glass magnesium board
| NAME | INDEX |
| Form | Liquid |
| Colour | Black, yellow |
| Viscosity | 250±20 |
| Temperature resistance | -20° -40° |
| Proportion | Zero point eight six |
| Flame retardancy | Non flame retardant |
| Surface drying time | 30s-300s |
